• Please use real names.

    Greetings to all who have registered to OPF and those guests taking a look around. Please use real names. Registrations with fictitious names will not be processed. REAL NAMES ONLY will be processed

    Firstname Lastname

    Register

    We are a courteous and supportive community. No need to hide behind an alia. If you have a genuine need for privacy/secrecy then let me know!
  • Welcome to the new site. Here's a thread about the update where you can post your feedback, ask questions or spot those nasty bugs!

Helpful Hints/D.I.Y.: My current large RingLight project

Asher Kelman

OPF Owner/Editor-in-Chief
Well there goes the Hensel! That must be running at a very high voltage! Did they design those heads around existing flash tubes or the other way around?

Asher
 

Asher Kelman

OPF Owner/Editor-in-Chief
Will,

With your Bulldog drive and focus, we could cure poverty, homelessness and trip at tgecspeed of light!

Congrats on your tube discovery. I must now design for you a case we’d 3D print with just allowance for power (from the Godox 200 pack),

....and a strong tripod mount!


Congrats.

You have the makings of the only ETTL controlled camera ring flash that will be mounted centered on the lens but behind the front of the lens held there by a bracket!

You are a genius!

Asher
 

Asher Kelman

OPF Owner/Editor-in-Chief
Will,

I now understand that your new tube has a large enough inside diameter that will now allow us to use the flash ring light with wide angle lenses like the 24-70 which cannot be front mounted wide angle lens would be blocked.

With this geometry and a large enough throat of the ring light even lenses approaching 4” in diameter can be inserted inside that extra wide throat.

I have TTL flat for a walk around event lens like a 24-70 or 24-105 is marvelous!

But how much would one be willing to pay for this ETTL addition to your Godox AD200 Pro portable pack?

Asher
 
Top